Download List

프로젝트 설명

DigiTemp uses a simple serial port adapter to read temperatures from the Dallas Semiconductor 1-Wire DS1820 digital temperature sensors. It supports the DS9097-U adapter, supports DS2409 based 1-Wire hubs, and features a 1-Wire walk that will display all devices on the LAN, not just temperature sensors.

System Requirements

System requirement is not defined
Information regarding Project Releases and Project Resources. Note that the information here is a quote from Freecode.com page, and the downloads themselves may not be hosted on OSDN.

2007-01-01 22:42
3.5.0

이 릴리스는 Windows 바이너리를 Cygwin에서 컴파일을 포함한 단일 tar.gz,에 모든 바이너리 출시 결합한 제품입니다. 그것은, DS1923 Hygrochron 지원을 추가하고 userial 드라이버에서 몇 가지 작은 버그 수정. lockdev 버그가 완료되면) 잠금을 해제하지 않음 (됐다 해결되었습니다. free_couplers의 충돌 ()에서 해결되었습니다. 더 나은 오류보고를 할 때 존재하지 않는 직렬 포트에 액세스하려고합니다. 이 릴리스의 Windows 용 Cygwin에서 컴파일됩니다. 비록 다른 사람이 성공을 거둘 수 있었 DS2490/9490 지원이 여전히 작가에 대한 작동하지 않습니다.
Tags: Major feature enhancements
This release combines all the binary releases into a single tar.gz, including Windows binaries compiled with Cygwin. It adds DS1923 Hygrochron support, and fixes some small bugs in the userial driver. A lockdev bug was fixed (wasn't unlocking when done). A crash in free_couplers() was fixed. There is better error reporting when trying to access serial ports that don't exist. This release is compiled for Windows with Cygwin. DS2490/9490 support still doesn't work well for the author, although others have had success with it.

2004-02-05 04:52
3.3.2

DS9097 지원 버전 3.3.1에서 깨진했다. 이 버전의 수정 프로그램. 좀 더 컴파일 문제를 청소했다. Mac OS X은 이제 지원됩니다.
Tags: Minor bugfixes
DS9097 support was broken in version 3.3.1. This
version fixes that. Some more compilation issues
were cleaned up. Mac OS X is now supported.

2004-02-02 02:38
3.3.1

1 DS9490R USB 용 지원 와이어 어댑터되었습니다 (DS2490 칩)을 사용하여 고정하고있다. Makefile을 이렇게 그것 편집할 수 DS2490에 대한 컴파일이 필요하지 않는가 수정되었습니다.
Tags: Minor feature enhancements
Support for the DS9490R USB to 1-wire adapter has been fixed (using the DS2490 chip). The Makefile has been fixed so that it doesn't need to be edited to compile for the DS2490.

2004-01-12 05:13
3.3.0

이 버전은 DS2438 배터리 모니터 및 AAG 습도 센서 습도 지원에 대한 지원을 추가합니다. 또한, 1 - 와이어 어댑터 DS2490 USB 용 예비 지원이 포함되어있습니다.
Tags: Major feature enhancements
This version adds support for the DS2438 battery monitor and humidity support for the AAG Humidity sensor. It also includes preliminary support for the DS2490 USB to 1-wire adapter.

2003-03-18 23:14
3.1.0

주요 기능은 1 - 와이어 날씨와 비가 역 측정에 사용되는 같은 DS2423 카운터에 대한 지원이 추가되었습니다. DS18S20 센서 모듈을 사용할 수있습니다. 이러한 네트워크에 둥글게, 클램프와 점퍼를 수동 모드 또는 +5 V 전원 모드에서 센서를 연결하는 2 개의 RJ는 - 쉽게 네트워킹, 1N5817 쇼트키 다이오드 45 커넥터가 포함되어있습니다.
Tags: Major feature enhancements
The main feature is the addition of support for DS2423 counters, such as those used in the 1-wire weather station and rain gauge. DS18S20 sensor modules are available. These include two RJ-45 connectors for easy networking, a 1N5817 schottky diode to clamp ringing on the network, and jumpers to connect the sensors in passive mode or +5v powered mode.

Project Resources